Mini-Project 2: Final

My mini-project worked, although it wasn't much to look at. I hoped for the spinning dangling parts to be more elaborate, and to make noise as it moved; I wanted it to be something that people wanted to make move.

I also didn't realize how violently the servo would spin them with my initial settings, so I had to stop it after the threads would get wrapped around the servo. And I should've made a stand for it or something, as hanging it wasn't an option, and holding it made the motion detection useless (since the camera itself was always moving).

I want to use a similar principle for my final, although not the servo; it was way too loud.

Demonstration