- I changed the PIN number to 12 and also used a different variable name. The delay parameter I used is different from the one in the tutorial.
Ladyada Ex. 3: Breadboard and LEDs
-I used my own breadboard setup for this.
Ladyada Ex. 3: Breadboard and Blinking LEDs
-I wired the negative side of the LEDs to GND on the Breadboard which was then wired to the GND on thee Arduino
Ladyada Ex. 3: Breadboard and Alternating Blinking LEDs
-I was able to make the LEDs alternate. I had to manually set the PIN voltage to LOW or HIGH after some delay. I do not know if there is a way to program "multithreading" in Arduino...
No comments:
Post a Comment